IS 710 : 2024
MARINE PLYWOOD - SPECIFICATION (Third Revision)
Current edition: 2024
Sectional committee: CED 20 · BIS department: Civil Engineering (CED)
What this standard covers
This standard covers requirements for materials, manufacture and performance of marine plywood suitable for the construction, repair and maintenance of marine and river craft, pontoons and the like.
Scope, quoted from IS 710 : 2010 — the 2010 edition in the public archive, not the current IS 710 : 2024. Read the full standard
The BIS registry lists the current edition as IS 710 : 2024. The publicly archived copy quoted here is the 2010 edition, so wording and requirements may have changed since. Check the official BIS listing for what is in force.
Requirements and tests, as the standard names them
- 9.1.2 Glue Adhesion in Dry State
- 9.1.3 Water Resistance Test
- 9.1.4 Tensile Strength
- 9.1.5 Mycological Test
- 9.1.6 Static Bending Strength
- 9.1.7 Wet Bending Strength
- 9.1.8 Retention of Preservative
Sub-clause names as printed under the heading “TESTS” in IS 710 : 2010 (the 2010 archived edition; BIS lists 2024 as current). Values and limits are deliberately not reproduced here — read them in the standard itself.
How the standard is organised
- 4 MATERIALS
- 5 MANUFACTURE
- 6 DIMENSIONS
- 7 WORKMANSHIP AND FINISH
- 8 SAMPLING
- 9 TESTS
- 10 ADDITIONAL
- 12 TENDER SAMPLE
Test methods it refers to
- IS 1734
Edition history (per the BIS registry)
- IS 710 : 2024 — current edition (last reviewed by BIS 2024-04-02)
- IS 710 : 2010 — withdrawn by BIS
Where this standard is used on NirmanDost
CPWD DSR 2021 (Civil Works)
| Item code | Description (verbatim) |
|---|---|
| 9.126.1 | Marine plywood conforming to IS: 710 |
| 9.168 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape… |
| 9.169 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws et… |
Open these items in CivicMate →
Materials market
Also cited in the Materials Market rate library and SKU sheets.
Pick up from here
Notes
- Status and titles come from the official BIS published/withdrawn standards registry (standards.bis.gov.in exports, July 2026 snapshot). Editions change — verify on the BIS portal before contractual use.
- The standard text is copyright BIS. NirmanDost shows registry metadata and links to the official source only — it never rehosts the document.
- Generated 2026-07-27.